Insulation contractor in Inglewood, CA - attics sealed before they're insulated
C&K South Gate Insulation Services is an insulation contractor working in Inglewood, CA. We seal and insulate attics, walls and crawl spaces, and pull out old insulation that's soaked or dirty before anything new goes in.
- Licensed and fully insured.
- Free in-person estimates.
- Expect a reply within 1 business day.
Insulating Inglewood homes from the attic down
Inglewood is a short drive west of us, past Florence-Graham, and the calls we take there sound like the ones we hear all over this side of the county: a drafty bedroom, a room over the garage that never feels right, a power bill that keeps creeping up. We're an insulation contractor in South Gate, CA, and on Inglewood blocks we mostly meet older single-family houses with duplexes and small apartment buildings mixed in, some lived in by their owners and some rented out by landlords, with shops and offices along the busier streets. We do the same attic and crawl space work down in Long Beach.
Houses this age usually have low, tight attics you crawl through rather than walk, often with the ductwork running right across them. That makes the job slower and fussier than the square footage suggests, and it shapes what we can do up there and in what order.
What we do on Inglewood homes
Attic insulation
Older attics here are often deep in the middle and thin near the eaves, which is backward, because the edges are where a room loses the most. Our attic insulation work evens that out with blown-in, which is loose fill blown through a hose, and we keep the eave vents clear so the attic can still breathe.
Attic air sealing
Can lights, plumbing pipes and the attic hatch all leave gaps that let air move between your rooms and the attic, and on an older house those gaps add up. Attic air sealing closes them before any new insulation goes down, since insulation sitting over a draft doesn't do much.
Insulation removal
When old insulation has been soaked by a roof leak or is full of droppings, putting new material on top just buries the problem. We bag the old layer, pull it out and clean up, and only then do we insulate.
Wall insulation
Older Inglewood houses often have walls with little or nothing inside them, which is why a room can stay drafty even after the attic is done. Our wall insulation work fills those empty spaces through small holes we patch afterward, so the walls don't have to come down.
Crawl space insulation
Houses built up off the ground with a crawl space underneath are where cold floors usually come from, because air moves freely under the boards. We check the crawl space for dampness first and then insulate under the floor, since insulation over a wet crawl space just holds the water.
Commercial insulation
Shops and small offices sit right beside the neighborhoods in Inglewood, and their owners deal with the same thin ceilings and leaky gaps that houses do. We handle commercial insulation the same way we handle a house, starting with what's already up there and sealing before we add anything.
What older Inglewood houses usually need
The first thing I look at in an older house here isn't how many inches are up there. It's whether what's there is wet, full of droppings or lying over wiring I don't like, because new insulation over a leak or bad wiring just hides the problem until it gets worse. If I find something like that, I'll tell you to fix it first or wait, even if that means we don't do the job yet, and once it's sorted we seal, then insulate, in that order.
The price moves mostly with the size of the attic, how hard it is to get into, whether the old layer has to come out and how many gaps need sealing. The schedule turns on removal and on whether your job needs a permit, and the free estimate I do at your house is where your own number comes from.
A free look at your Inglewood attic or crawl space
Tell us about your Inglewood house, and ask how the city's permit steps might apply to it, and we'll reply within one business day. Then I come out to look at the job in person, free and with no obligation, and tell you what I'd do first and why. If you'd rather talk now, call (213) 329-0381.
Inglewood insulation questions
Here are plain answers on permits, inspections, cost and timing for insulation work in Inglewood. If your question is about your own house, describe the job and ask us.
Do I need a permit to insulate my attic in Inglewood?
Possibly, so we check before we start. Inglewood's permit guidance says a building permit is required whenever a building is altered, improved or repaired, not just when one is built, and the Building Safety Division is the office that issues it. If we're not sure about your job, we ask the division about your address before work starts, and when a permit is needed, we pull it.
How do I request a building inspection in Inglewood?
Every Building Safety inspection in Inglewood is now requested online through the division's OpenGov portal, whether the homeowner or the contractor books it. When we pull the permit for your job, we set up the inspections there ourselves, so you don't have to.
How much does insulation cost for a house in Inglewood?
Your price comes from the estimate I do at your house, and the biggest choice in it is the material. Spray foam costs more because it seals air while it insulates, and I'd only lean toward it when your ductwork runs through the attic, because otherwise sealing the gaps and topping up with blown-in usually gets you more for your money. If the job needs a permit, the city says its fee depends on the type and complexity of the project, and you can call the city for an estimate of that fee.
How long does attic insulation take, and when can my family go back inside?
Most of the time in your attic goes to prep, sealing and any removal, and on a blown-in job you can usually stay home the whole time. Spray foam is different, because you stay out for the re-entry time the foam maker sets, which is how long before you, the kids and the pets can come back inside, and we tell you that time before we start.
Do I need an appointment at Inglewood Building Safety to get a permit?
For some counter services, yes. The division asks for an appointment through QLESS for plan check submittals, over-the-counter permits and ready-to-issue permits, and its office is on the 4th floor at One W. Manchester Blvd. If we're pulling the permit for your job, we take care of that, and if you have a question of your own, the division answers permit and inspection questions at (310) 412-5294.
Does a South Gate insulation contractor work in Inglewood?
Yes, we're based in South Gate and work across the cities around it, and Inglewood is one of them. I come out to look at the job myself and work alongside our crew on it, and we're licensed and fully insured, backed by our satisfaction guarantee.
Insulation work up close
Other cities we work in
Choose a city from the list to see what we do there, or call or send the form if your address isn't listed.